Interlogix GE-DSH-73 Series User Manual - Manual (Page 33)

Chapter 2: Installation
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 29
Figure 2-18 : DI/DO terminal block of GE-DSH-73
Installing the SFP transceiver
The section describes how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot pluggable and hot swappable. You can plug-in and out
the transceiver to/from any SFP port without having to power down the Industrial
Switch. Shown in Figure 2-19.
Figure 2-19 : Plug-in the SFP transceiver