Interlogix GE-DSH-73 Series User Manual User Manual
Page 35
Advertising
Chapter 2: Installation
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
31
Figure 2-20
:
LC fiber optical cable connects to the transceiver
• Remove the transceiver module
1. Make sure there is no network activity by consulting or checking with the network
administrator or through the management interface of the switch/converter (if
available) to disable the port in advance.
2. Remove the Fiber Optic Cable gently.
Figure 2-21
:
Pull out the SFP transceiver
3. Turn the handle of the MGB module horizontally.
4. Pull out the module gently through the handle.
Advertising
This manual is related to the following products: