Interlogix GE-DSH-73 Series User Manual - Manual (Page 28)

Chapter 2: Installation
24 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Switch when out of factory. If the DIN-Rail is
not screwed on the Industrial Switch, please see the following pictures to screw the
DIN-Rail on the Switch. Follow the steps below to hang the Industrial Switch.
Figure 2-10 : Rear Panel - DIN-Rail Kit
1. Insert the top of DIN-Rail into the track.
Figure 2-11 : Rear Panel - DIN-Rail Kit