Interlogix NVR 50 User Manual - Manual (Page 129)

14BChapter 15: NVR management
TruVision NVR 50 User Manual 123
Restoring default settings
To restore the default factory settings of the NVR:
1. Click the System Settings icon in the menu toolbar and select
Configuration .
2. Click the Default tab. Click OK to confirm you want to restore default settings.
Note: Network information such as IP address, subnet mask, gateway, MTU,
NIC working mode, server port and default route are not restored to factory
default settings.
Viewing system information
To view system information:
1. Click the System Settings icon in the menu toolbar and select System
Information .
2. To view device information, click the Device Info tab.
3. To view camera information, click the camera tab.