Interlogix NVR 50 User Manual - Manual (Page 135)

15BChapter 16: User management
TruVision NVR 50 User Manual 129
Remote configuration settings:
• Remote Log Search: Remotely view logs that are saved on the NVR.
• Remote Parameter Settings: Delete and restore the factory defaults.
• Remote Camera Management: Remotely adding, deleting, and editing of IP
cameras.
• Remote Serial Port Control: For future use.
• Two-Way Audio: Use two-way audio between the remote client and the
NVR.
• Remote Alarm Control: Remotely trigger and clear the I/O alarm output.
Alarm and notification settings must be configured properly to upload to host.
• Remote Advanced Operation: Remotely manage HDDs (initializing and
setting properties for HDDs) as well as remotely update system firmware.
• Remote Shutdown/Reboot: Remotely shutdown or reboot the NVR.
Camera configuration settings:
By default, all IP cameras are enabled for operators for each of these settings
and guests have Local Playback and Remote Playback privileges by default.
• Remote Live View: Select and view live video over the network.
• Local Manual Operation: Locally start/stop manual recording on any of the
channels, snapshots, and video clips.
• Local Playback: Locally play recorded files that are on the NVR.
• Remote Playback: Remotely play and download recorded files that are on
the NVR.
• Local PTZ Control: Locally controlling PTZ dome cameras.
• Remote PTZ Control: Remotely control PTZ dome cameras.
• Local Video Export: Locally back up recorded files from any of the channels.
To customize a user’s access privileges:
1. Click the User Management icon in the menu toolbar to display its screen.
2. Click the Permission button for the user whose access privileges need to
be changed. The Permissions pop-up screen appears.
3. Click Apply to save the settings .
4. Click the OK button to return to the previous screen.
8. Click Back to return to live view.