Interlogix NVR 50 User Manual - Manual (Page 33)

TruVision NVR 50 User Manual 27
Chapter 5
Live view
Description of live view
Live view mode is the normal operating mode of the unit where you watch live
images from the cameras. The TVN 50 automatically enters into live view mode
once powered up. On the viewer, you can see the current date and time, camera
name, and whether a recording is in progress.
Status information
Information on the system and camera status is displayed as icons on the main
and spot monitors. The camera status icons are shown for each camera. Each
icon represents information on a specific item. These icons include:
Table 5: Description of the on-screen status icons
Icon Description
Indicates a sensor alarm.
Indicates recording (such as manual recording, motion detection or alarm-
triggered recording).
Indicates a motion detection event.
Indicates a video loss event.
Indicates alarm and system notifications. Clicking the icon opens a screen that
lists the alarms and notifications.
More than one icon can be displayed at the same time.
The system status is displayed on the front panel by the status LEDs.
Video output
The TVN 50 can be connected to up to two monitors. However, only one monitor
can be controlled at a time.