Interlogix NVR 50 User Manual - Manual (Page 34)

4BChapter 5: Live view
28 TruVision NVR 50 User Manual
The NVR automatically checks the monitor outputs used. If more than one
monitor is connected, the system then defines which monitor is the main one and
which is the event one. The event monitor is used to display detected events
such as motion. It cannot be configured separately.
The priority level for the main output is HDMI > VGA > CVBS. See Table 6
below. However, you can manually define your main monitor from the Layout
menu.
Table 6: Monitor output priority level
Monitor output in use Priority level
HDMI VGA CVBS Main monitor
 
HDMI
 
VGA

CVBS
  
HDMI
To select the video output of the main monitor:
1. Click the Display Mode Settings icon in the menu toolbar.
2. Select Layout > General .
3. From Video Output Interface, select which monitor will be the main monitor:
HDMI (depends on NVR model), VGA, main CVBS, or spot output. HDMI is
default, if connected.
To control a monitor:
On the front panel press button A to select the main monitor. Press button B
to select the event monitor.
Audio output
The HDMI monitor connector on the back panel outputs both video and audio
signals. There is an audio output on the back panel for speakers.
Controlling live view mode
Many features of the live view mode can be quickly accessed by placing the
cursor on a live image and clicking the right-button of the mouse. The mouse
menu appears (see Figure 11 on page 29).