Interlogix NVR 50 User Manual - Manual (Page 17)

TruVision NVR 50 User Manual 11
Chapter 3
Getting started
Turning on and off the NVR
Before starting the power up process, connect at least one monitor to the video
out or the VGA interface. Otherwise, you will not be able to see the user interface
and operate the device.
The TVN 50 auto-detects the video mode (PAL or NTSC) on startup.
It is equipped with a universal power supply that will auto-sense 110/240 V,
60/50 Hz.
Note: It is recommended that an uninterruptible power supply (UPS) is used in
conjunction with the device.
To turn on the NVR:
Turn on the NVR using the power switch on the back panel. The power LED
illuminates. A splash screen appears indicating that the NVR is starting up.
The Start Up Wizard window will appear.
To turn off the NVR:
1. In live view mode, right-click the mouse and click Menu . The main menu
screen appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Shutdown . Click Yes to confirm
shutdown.
To reboot the NVR:
1. In live view mode, right-click the mouse and click Menu . The main menu
screen appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Reboot . Click Yes to confirm shutdown.