Interlogix NVR 50 User Manual - Manual (Page 40)

4BChapter 5: Live view
34 TruVision NVR 50 User Manual
Figure 15: Layout screen
Table 10: Description of the layout screen
Submenu name Description
General tab
Video output interface Select which monitor will be the main monitor: HDMI (depends on
NVR model), VGA, and main CVBS.
Default is VGA, if connected.
Live view mode Select which multiview layout will be default in live view mode. Default
is 4x4 multiview layout.
Dwell time Set the length of time for which a camera image is displayed on the
selected monitor before moving to the next camera during
sequencing. Default is off (“No switch”).
Enable audio out Check the box to enable/disable audio output.
Event output Designates which monitor will be the output to show the event. Default
is disable.
Full screen monitoring
dwell time Set the length of time for which an alarm event appears on the output
monitor before moving to the next camera during sequencing. Default
is 10 seconds.
To set up the display options:
1. Click the Display Mode Settings icon in the menu toolbar.
2. Select Layout > General .
3. Specify the desired settings for each of the menu options.