Interlogix NVR 50 User Manual User Manual
Page 49
5BChapter 6: Controlling a PTZ camera
TruVision NVR 50 User Manual
43
Note:
The PTZ dome camera used must be able to support a preset command.
See Appendix F on page 153 for the complete list of PTZ commands available by
camera protocol.
Figure 21: PTZ configuration window
Table 15: Description of the PTZ configuration window
Item
Name
Description
1.
Save preset
Saves preset.
2.
Call preset
Calls up pre-existing preset.
3.
Shadow tour toolbar
Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Stops the selected shadow tour.
4.
Preset tour toolbar
Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scrolls up the list.
Scrolls down the list.