Interlogix NX-1710E - Manual (Page 17)

NX-1710E Single Door Control 17
L OCATION 42 A CTIVATION D ATA FOR U SER C ARDS 1 - 120
(15 segments of binary data)
This location is used to select which user cards 1 through 120 are activated. If the LED is “on”, the card is
active. Each segment has 8 LEDs corresponding to the 8 possible user cards. Example: Segment 4, LED 2
indicates that user card 26 is active.
Segment 1 User Cards 1 - 8 Segment 9 User Cards 65 - 72
Segment 2 User Cards 9 - 16 Segment 10 User Cards 73 - 80
Segment 3 User Cards 17 - 24 Segment 11 User Cards 81 - 88
Segment 4 User Cards 25 - 32 Segment 12 User Cards 89 - 96
Segment 5 User Cards 33 - 40 Segment 13 User Cards 97 - 104
Segment 6 User Cards 41 - 48 Segment 14 User Cards 105 - 112
Segment 7 User Cards 49 - 56 Segment 15 User Cards 113 - 120
Segment 8 User Cards 57 - 64
L OCATION 43 P ROGRAMMING A CTIVATION D ATA FOR U SER C ARDS 121 - 240
(15 segments of binary data) This location is used to select which user cards 121 through 240 are activated. If
the LED is “on”, the card is active. Each segment has 8 LEDs corresponding to the 8 possible user cards.
Example: Segment 15, LED 8 indicates that user card 240 is active.
Segment 1 User Cards 121 - 128 Segment 9 User Cards 185 - 192
Segment 2 User Cards 129 - 136 Segment 10 User Cards 193 - 200
Segment 3 User Cards 137 - 144 Segment 11 User Cards 201 - 208
Segment 4 User Cards 145 - 152 Segment 12 User Cards 209 - 216
Segment 5 User Cards 153 - 160 Segment 13 User Cards 217 - 224
Segment 6 User Cards 161 - 168 Segment 14 User Cards 225 - 232
Segment 7 User Cards 169 – 176 Segment 15 User Cards 233 - 240
Segment 8 User Cards 177 - 184
L OCATION 44 C ODE E NTRY L OGGING P ARTITION
(2 segments of numerical data) This location programs the partition that is logged with the Code Entry
message and sent when the following conditions are met:
An RTE scan function is selected (Location 0, Segment 1/2, Option 8); and
“RTE from a scanned card is to be logged as Code Entry” is enabled (Location 3, Segment 1, Option 5).
Entering a 0 (zero) will send the lowest valid partition of the reader. Entering 1-16 will send the entered value as
the partition. (Default is 0.)
Segment 1 Code Entry Logging Partition for Reader “A”
Segment 2 Code Entry Logging Partition for Reader “B”
LED1 = Card 1
LED2 = Card 2
LED3 = Card 3
LED4 = Card 4
LED5 = Card 5
LED6 = Card 6
LED7 = Card 7
LED8 = Card 8
LED1 = Card 1
LED2 = Card 2
LED3 = Card 3
LED4 = Card 4
LED5 = Card 5
LED6 = Card 6
LED7 = Card 7
LED8 = Card 8