Interlogix NX-1710E - Manual (Page 35)

NX-1710E Single Door Control 35
LOCATION 142 – WIEGAND FORMAT 8 (PARITY MASK 2)
SEG
DESCRIPTION DEFAULT DATA SEG DESCRIPTION DEFAULT DATA
1 Parity Mask 1 -------- 5 Parity Mask 5 --------
2 Parity Mask 2 -------- 6 Parity Mask 6 --------
3 Parity Mask 3 -------- 7 Parity Mask 7 --------
4 Parity Mask 4 -------- 8 Parity Mask 8 --------
LOCATION 143 – WIEGAND FORMAT 8 (PARITY TYPE 3) 0=No Parity; 1=Odd Parity; 2=Even Parity
1 Parity Type 3 0
LOCATION 144 – WIEGAND FORMAT 8 (PARITY MASK 3)
1 Parity Mask 1 -------- 5 Parity Mask 5 --------
2 Parity Mask 2 -------- 6 Parity Mask 6 --------
3 Parity Mask 3 -------- 7 Parity Mask 7 --------
4 Parity Mask 4 -------- 8 Parity Mask 8 --------
LOCATION 145 – WIEGAND FORMAT 8 (PARITY TYPE 4)
1 Parity Type 4 0
LOCATION 146 – WIEGAND FORMAT 8 (PARITY MASK 4)
1 Parity Mask 1 -------- 5 Parity Mask 5 --------
2 Parity Mask 2 -------- 6 Parity Mask 6 --------
3 Parity Mask 3 -------- 7 Parity Mask 7 --------
4 Parity Mask 4 -------- 8 Parity Mask 8 --------
LOCATION 147 – WIEGAND FORMAT 8 (PARITY TYPE 5)
1 Parity Type 5 0
LOCATION 148 – WIEGAND FORMAT 8 (PARITY MASK 5)
1 Parity Mask 1 -------- 5 Parity Mask 5 --------
2 Parity Mask 2 -------- 6 Parity Mask 6 --------
3 Parity Mask 3 -------- 7 Parity Mask 7 --------
4 Parity Mask 4 -------- 8 Parity Mask 8 --------
X. ORDERING INFORMATION
PART # DESCRIPTION
NX-1710E Single Door Control Module
NX-1700E Proximity Card Reader
NX-848E-KIT NX-8E Control, NX-148E LED Keypad, 40VA Transformer
NX-848-KIT NX-8 Control, NX-148E LED Keypad, 40VA Transformer
NX-648-KIT NX-6 Control, NX-148E LED Keypad, 40VA Transformer
XI. GLOSSARY
TERM DESCRIPTION
Request To Exit (RTE)…… A zone can be programmed to monitor an open door. The RTE activates the
onboard relay and sends a message on the buss. (Refer to Loc 0, Pg 11)
Scan………………………. To “present” or pass a card or FOB within sensing range of the card reader
module.
Single Beep……………….. An audible indicator (beep).
Single Scan………… When a user card is scanned and held at the reader for 1 beep, the reader
will perform the functions as programmed in Loc 0, Pg 11
Triple Beep………………... An audible indicator (beep, beep, beep).
Triple Scan…………. When a user card is scanned three times at the reader, the reader will
perform the functions as programmed in Location 0 & 1, Pgs 11 & 12