Interlogix NX-1710E - Manual (Page 22)

NX-1710E Single Door Control 22
SEG
DESCRIPTION
5 WEIGAND FORMAT ENABLES
1 = Weigand format # 1
2 = Weigand format # 2
3 = Weigand format # 3
4 = Weigand format # 4
5 = Weigand format # 5
6 = Weigand format # 6
7 = Weigand format # 7
8 = Weigand format # 8
LOCATION 4 – PROGRAMMING THE ZONES
1 DOOR SHUNT ZONE Default = 0
Additionally, this zone must be configured in the control panel as a Door Shunt zone by programming an unused
Zone Type Characteristic in locations 111-169 (Seg 4, Opt 4).
2 REQUEST TO EXIT (RTE) ZONE Default = 0
Additionally, this zone must be configured in the control panel as an RTE zone by programming an unused Zone
Type Characteristic in locations 111-169 (Seg 4, Opt 3).
LOCATION 5 – READER TIMERS
1 Scan Time (1/100 seconds) Default = 100 (1 second)
2 Relay Active Time (seconds) Default = 10
3 Door Fault Warning Time (seconds) Default = 30
4 Door Fault Alarm Time (seconds) Default = 60
LOCATION 6 – OPENING TIME FOR SCHEDULE 1
1 Hour of Opening (24-hr format) Default = 8 (8 AM)
2 Minutes after Hour of Opening Default = 0
LOCATION 7 – CLOSING TIME FOR SCHEDULE 1
1 Hour of Closing (24-hr format) Default = 20 (8 PM)
2 Minutes after Hour of Closing Default = 0
LOCATION 8 – DAYS FOR SCHEDULE 1
1 = "On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.
LOCATION 9 – OPENING TIME FOR SCHEDULE 2
1 Hour of Opening (24-hr format) Default = 8 (8 AM)
2 Minutes after Hour of Opening Default = 0
LOCATION 10 – CLOSING TIME FOR SCHEDULE 2
1 Hour of Closing (24-hr format) Default = 20 (8 PM)
2 Minutes after Hour of Closing Default = 0
LOCATION 11 – DAYS FOR SCHEDULE 2
1 = "On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.
LOCATION 12 – OPENING TIME FOR SCHEDULE 3
1 Hour of Opening (24-hr format) Default = 8 (8 AM)
2 Minutes after Hour of Opening Default = 0
LOCATION 13 – CLOSING TIME FOR SCHEDULE 3
1 Hour of Closing (24-hr format) Default = 20 (8 PM)
2 Minutes after Hour of Closing Default = 0
LOCATION 14 – DAYS FOR SCHEDULE 3
1 = "On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.