Add a language pack remove a language pack, Add a language pack, Remove a language pack – Interlogix TruPortal User Manual
Page 105
TruPortal Software User Guide
93
Managing Language Packs
Add a Language Pack
1.
Launch a supported Internet browser.
2.
Download the desired language pack from the product website to a local client workstation or a
shared file system.
3.
Log into the System as a user with Modification permissions.
4.
Select System Administration > Language Packs.
5.
Click [Add].
Note:
The [Add] button is only enabled if less than four language packs are currently installed.
If necessary, remove a language pack (except English and the current System-level
language pack) before adding a new language pack. See
6.
In the Open dialog box, navigate to the folder to which the language pack (the file has a .NLS
extension) was downloaded, select the file, and then click [Open].
7.
When the Language Pack Add-On window appears, click [Install].
8.
When installation is complete, click [Finish].
9.
To begin using the new language:
a.
Log out of the System by clicking the Logout icon in the top-right portion of the User
Interface.
b.
Follow the steps in
on page 15 and select the new language in the
Language field.
Remove a Language Pack
Note:
Neither English nor the current System-level language pack can be removed.
1.
Select System Administration > Language Packs.
2.
Click the language pack to select it.
3.
Click [Remove].
The Remove Item dialog box appears.
4.
Click [Remove].