Interlogix TruPortal - Manual (Page 26)

Configuring the System
14 TruPortal Software User Guide
IMPORTANT: If any IPSDCs are installed, configure them to recognize the IP address of the
System Controller before configuring them in the User Interface. See
Configuring IP-Based Single Door Controllers on page 106.
1. Logging into the System .
2. Setting the Date and Time .
3. Create a Certificate Signing Request .
4. Import a Security Certificate .
5. Configure Network Settings .
6. Configure Site Security .
7. Set the System Language .
8. Add a Card Format .
9. Scan for Hardware Changes .
10. Assign Meaningful Names to Hardware .
11. Configure the System Controller .
12. Optional: Configure I/O Expansion Modules .
13. Configure a Door Controller .
14. Configure a Door .
15. Configure Readers .
16. Optional: Add a DVR/NVR .
17. Optional: Add a Video Camera .
18. Optional: Link Cameras to Devices to Track Video of Events .
19. Optional: Add an Area .
20. Optional: Configure Anti-Passback .
21. Optional: Assign Readers to Areas .
22. Optional: Add a Holiday Group .
23. Optional: Add a Schedule .
24. Optional: Add a Reader Group .
25. Add an Access Level .
26. Optional: Add an Operator Role .
27. Optional: Configure an Email Server .
28. Optional: Add an Email List .
29. Optional: Add User-Defined Fields .
30. Optional: Scheduling Door and Reader Behavior .
31. Importing Persons and Credentials from a CSV File .
32. Optional: Configuring Action Triggers .
33. Optional: Configuring a Network Share .
34. Creating a Backup and Restore Point .
35. Optional: Add an Action Trigger Record .
36. Optional: Add a Language Pack .