Philips STU909 - Manual (Page 13)

Installation of a fixed
dish antenna
Installation
Before you can select the satellite programmes, make sure that the
configuration (see section 6) is in accordance with your equipment:
- ANTENNA POSITIONER: NO.
-NUMBER OF DISHES: 1.
- Set the LNC and Polarizer types information as described in section 6.
Note:
Make sure that your DISH ANTENNA is connected to input 1.
For your convenience, we have pre-programmed your STU 909 with all the
satellite TV and radio stations that you can receive (see separate list).
However, this list is changing almost daily, and you can obtain the latest
information from your dealer.
Select Satellite positions
O Press key MENU
> The MAIN MENU menu appears on the screen
O Select INSTALLATION
l> The INSTALLATION menu appears on the screen
I> Lamp ON flashes green
O Press 3: SELECT SATELLITE POSITIONS.
> The SATELLITE POSITIONS menu appears on the screen.
O Press 2: SATELLITE LIST.
O The SATELLITE LIST menu appears on the screen
O Press 1 and select the satellite wanted from the list with - or + .
O Press the MENU key again.
> The SATELLITE POSITION menu appears again on the screen.
O Press 3
[> The word STORED will flash at the upper right corner of the screen.
If your dish antenna is aligned correctly:
O Press OFF.
> Your Satellite Tuner is now ready for use.
Note:
If some programmes are missing , or you are not completely satisfied with the
picture/sound quality, see section 10.
INSTALLATION
1 MENU UNGUAGE
2C0NRGURAT10N
3 SELECT SATELLITE POSmONS
4 SELECT PROGRAMMES
5 TXT PREFERENCE PAGES
6SETCLOCK
select: 1 - 6, off
SATELLITE POSITIONS
1 RND SATELLITE POSITIONS
2 SATELLITE UST
3 STORE SATELLITE DATA
select: 1 > 3, -, +, menu, off
NAME NAME NAME
TELE-X TV-SAT
KOPERN2 TDF
ASTRA A
ASTRA B
EUTUF1
OLYMPUS
1 SELECT SATELLITE
2 NEXTCHARACTER OLYMPUS
1
select: 1 - 2 , -, +, menu, off
13