Philips STU909 - Manual (Page 14)

If your dish antenna needs to be aligned:
O Press OFF
O Press 1
I> The first programme is selected
Align your dish antenna until you receive the correct satellite programme.
Note:
If fine tuning is required, or you want to add programmes, see section 10.
If you want to add a new satellite:
If the required satellite is not pre-programmed in the factory (see enclosed
list), menu item 1 of the SATELLITE POSITIONS menu can help you to align
your dish antenna.
O Press 1 of SATELLITE POSITIONS menu.
I> The FIND SATELLITE POSITIONS menu appears on the screen.
O Press 1.
I> The receiver executes a fast scan of all channels. This allows you to detect a
satellite while moving the dish.
O Press 2.
> A programme is searched automatically which allows tine tuning of the dish
antenna with the help of the signal strength indicator.
O Press MENU.
I> The SATELLITE POSITIONS menu appears on the screen.
Name of new satellite/change of existing name
O Press 2.
I> The SATELLITE LIST menu appears on the screen.
O Press 1.
O Using - or +, select an empty location or the name you want to change.
O Press 2 and, using - or +, select a letter or digit.
O Press 2 again and, using - or +, select the next letter or digit.
I> In this way select the new satellite name (max. 7 characters).
If you have entered the satellite name:
O Press MENU.
t> The SATELLITE POSITIONS menu appears on the screen.
O Press 3.
I> The word STORED will flash at the upper right corner of the screen.
Satellite name is stored.
O Press OFF.
SATELLITE POSITIONS
1 FIND SATELLITE POSITIONS
2 SATELLtTE LIST
3 STORE SATELUTE DATA
selecl: t • 3, *. ♦, m»nu, oH
FIND SATELLITE POSITIONS
SIGNAL STRENTHM58
1. SEARCH FOR SATELLITE
2. CHANNEL SEARCH
select: 1«2, menu, off
1 SATELLITE LIST
NAME NAME
TELE-X TV-SAT
KOPERN2 TDF
ASTRA A
ASTRA B
EUTIIF1
OLYMPUS
1 SELECT SATELUTE
2 NEXT CHARACTER OLYMPUS
I
select: 1*2,-, ♦. menu, off
14