Philips STU909 - Manual (Page 15)

Cj Installation of two fixed
dish antennae
Installation
Before you can select the satellite programmes, make sure that the
configuration (see section 6) is in accordance with your equipment:
- ANTENNA POSITIONER: NO.
- NUMBER OF DISHES: 2.
- Set the LNC and Polariser types information as described in section 6.
For your convenience, we have pre-programmed your STU 909 with all the
satellite TV and radio stations that you can receive (see separate list).
However, this iist is changing almost daily, and you can obtain the iatest
information from your dealer.
For Main dish antenna (1):
Note:
Make sure that your MAIN DISH ANTENNA is connected to input ^ 1.
Select Satellite positions
O Press key MENU
D> The MAIN MENU menu appears on the screen
O Select INSTALLATION
l> The INSTALLATION menu appears on the screen
> Lamp ON flashes green
O Press 3.
O The SATELLITE POSITIONS menu appears on the screen.
O Press 1 and select input >1< with - or +.
O Press 3.
I> The SATELLITE LIST menu appears on the screen.
O Press 1 and select the satellite wanted from the list with - or +.
O Press the MENU key again.
> The SATELLITE POSITIONS menu appears again on the screen.
O Press 4.
> The word STORED will flash at the upper right corner of the screen.
I> The seleted satellite for dish 1 is stored
For aligning your DISH, changing the name of the satellite or adding a new
satellite, see section 7.
INSTALLATION
1 MENU LANGUAGE
2CONRGURATION
3 SELECT SATELLITE POSITIONS
4 SELECT PROGRAMMES
5 TXT PREFERENCE PAGES
6 SET CLOCK
select: 1 - 6, off
SATELLITE POSITIONS
1 ANTENNA INPUT
2 RND SATELLITE POSITIONS
3 SATELLITE UST
4 STORE SATELLITE DATA
select: 1 • 4, 4, menu, off
m\w\ pr~—
NAME NAME NAME
TELE-X TV-SAT
KOPERN2 TDF
ASTRAA
ASTRA B
EUTUFt
OLYMPUS
1 SELECT SATELLITE
2 NEXT CHARACTER OLYMPUS
select: 2. -, 4, menu, off
15