Introduction, Safety instructions, Mains connection – Philips STU909 User Manual

Page 4: Positioning your philips stu 909

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

J

Introduction

We hope you will enjoy using your new Philips STU 909 multi-standard

satellite tuner. This tuner will open up an entire world of satellite TV reception;

both of the new D2-MAC broadcasts and all today’s conventional PAL

transmissions. In particular, the STU will allow you to receive the increasing

number of programmes broadcast in the new D2-MAC Wide-Screen 16:9

format.

You can use your Philips STU 909 satellite tuner with one or two fixed satellite
dish antennae, or with a motor-controlled rotatable dish which will allow you to

receive programmes from any satellite you wish, if your dish is suitable.

We advise that you ask your Philips dealer to handle the installation of your

Philips satellite dish antenna and your STU 909 tuner.

Safety instructions

To avoid short-circuits, which may cause fire or electric shock, do not expose
this Philips STU 909 receiver to rain or moisture.

Dangerous voltage inside. Do not open the cabinet. There are no user

serviceable parts inside. Repairs should be carried out by qualified service

personnel only.

NEVER connect or modify cables while the receiver is connected to the

mains. Ensure that no objects or fluids pass through the ventilation openings.

Do not put your receiver close to an external source of heat (radiator, etc.).
Ensure that air can circulate freely through the ventilation openings of the
receiver. Your receiver supplies 14 or 18 V DC voltage to your satellite dish

antenna. Make sure you only connect your satellite dish to the satellite dish
inputs, 27 and 28, and nothing else.

MAINS connection

Do not connect the receiver to the mains yet, but continue reading these

Operating Instructions!

NEVER connect or modify cables while the receiver is connected to the mains.

Positioning your Philips STU 909

Satellite Tuner

The STU 909 is intended for use in a domestic environment only and should

never be operated or stored in excessively hot or humid atmospheres.

Choose a position some distance away from radiators or other sources of
heat.

Leave a clear space of at least 3 cm all around the set for ventilation. Make

sure that curtains, cupboards, etc. cannot obstruct the air flow through the

ventilation openings.

Insert batteries in the remote control

O Remove the battery cover located on the back of the remote control handset.
O Insert three batteries (type R03S 1.5 V).
O Replace the battery cover.

Advertising
This manual is related to the following products: