How to connect satellite dishes, Dish inputs, Polarizer – Philips STU909 User Manual
Page 7: Installation dish inputs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
)
v\
How to connect Satellite
dishes
Installation
Dish inputs
One or two dish antennae can be connected to your satellite tuner as
indicated in the drawing below.
Note:
Before connecting satellite dishes you need to remove the red protection cap
(if present) on the satellite dish inputs.
The connector for dish input 1 is supplied.
Polarizer
The STU 909 can control various kinds of polarizers. Please make sure that
you connect them as indicated in the drawing.
Note:
It is recommended to make known to the satellite tuner the type of polarizer
before you connect it. (see section 6: configuration).
/
Magnetic
polarizer
CURR
Advertising
This manual is related to the following products: