For second dish antenna (2) – Philips STU909 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For second Dish Antenna (2):
Make sure that your second dish antenna is connected to input ^ 2.
O Press key MENU
1> The MAIN MENU menu appears on the screen
O Select INSTALLATION
I> The INSTALLATION menu appears on the screen
> Lamp ON flashes green
O Press 3.
> The SATELLITE POSITIONS menu appears on the screen.
O Press 1 and select input >2< with - or +.
O Press 3
I> The SATELLITE NAME menu appears on the screen.
O Press 1 and using - or +, select a letter or digit.
O Press 1 again and, using - or +, select the next letter or digit.
In this way select the new satellite name (max. 7 characters).
O Press MENU.
> SATELLITE POSITIONS menu appears on the screen.
O Press 4
> The word STORED will flash at the upper right corner of the screen.
[> The selected satellite for DISH 2 is stored.
For alignment of DISH ANTENNA, please refer to section 7.
INSTALLATION
1 MENU LANGUAGE
2 CONFIGURATION
3 SELECT SATELUTE POSITIONS
4 SELECT PROGRAMMES
5 TXT PREFERENCE PAGES
eSETCLOCK
select: 1 «6, oH
SATELLITE POSITIONS
1 ANTENNA INPUT
2 FIND SATELUTE POSITIONS
3 SATELUTE LIST
4 STORE SATELLITE DATA
select: 1 • 4, •, *, menu. ot(
SATELLITE NAME
1 NEXT CHARACTER
select:
menu, olf
16