Juniper Systems Allegro 2 User Guide - Manual (Page 58)

54 Allegro 2 Rugged Handheld Owner’s Manual
Wi-Fi Wireless Networking
The Allegro 2 has built-in Wi-Fi wireless networking to
connect to the Internet or a office network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. To actively look for a network
connection complete the following steps:
1. From the Home screen, turn Wi-Fi on by selecting the
Wi-Fi gadget . The Allegro 2 automatically starts
scanning the area for available Wi-Fi networks. (If the
Wi-Fi gadget is not on the Home screen, open the Start
screen, and select Getting Started. Select Set up Wi-Fi or
press Start > Settings > Connections > Wireless Manager.)
2. Tap-hold the Wi-Fi icon on the Home screen to go to
the Wi-Fi control panel. When the handheld completes