Juniper Systems Mesa with Barcode Scanner - Manual (Page 27)

Mesa Barcode Scanner Owner’s Manual 27
8 – My Code 39 Full ASCII barcode will not scan.
Reason/Solution: On the 1D Code Type tab, select
Options, then the Code 39 tab. Ensure that the
lengths are set to the fullest range.
9 – My Bookland EAN barcode will not scan.
Reason/Solution: Ensure that both Bookland EAN
and EAN-13 are enabled on the 1D Code Types
tab.
10 – My ISBN, ISMN, ISSN, or JAN barcodes will not
scan.
Reason/Solution: These barcode types are all
subsets of EAN-13. Ensure that EAN-13 is enabled
on the 1D Code Types tab.
11 – I can’t figure out how to configure Intelligent
Mail or OneMail barcodes.
Reason/Solution: Intelligent Mail and OneMail
barcodes are the same thing. They are also
called USPS 4CB (located on the Composite/
Postal Code Types tab).
12 – CLSI editing has no effect.
Reason/Solution: CLSI editing is only supported for
14 character Codabar barcodes.