Juniper Systems Mesa with Barcode Scanner - Manual (Page 28)

28 Mesa Barcode Scanner Owner’s Manual
Certifications and Standards
CLASS 1 LASER & LED PRODUCT
CLASSIFIED EN/IEC 60825-1 2007 & AS/NZS
2211.1:2004”
Complies with 21 CFR 1040.10 & 1040.11 except for
deviations pursuant to Laser Notice No. 50 dated
June 24, 2007
Caution – use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
This barcode scanner is not user-serviceable. Units
requiring service or repair must be returned to the
factory.
This barcode scanner is not to be opened or
modified by the user. This product does not
require scheduled maintenance to remain
compliant to the applicable standards.
This laser product is designated as Class 1 during
all procedures of operation. For instructions on
activating/deactivating the laser aimer and LEDs,
please read the section on software operation.