Irq n resources – Contec SPI-8450-LLVA User Manual
Page 109
CHAPTER 8 - BIOS Setup
102
SPI-8450-LLVA
Description
Choices
Reset Configuration Data
Normally, you leave this field Disabled. Select
Enabled to reset Extended System Configuration
Data (ESCD) when you exit Setup if you have
installed a new add-on and the system
reconfiguration has caused such a serious conflict
that the operating system can not boot.
IRQ n Resources
When resources are controlled manually, assign each system interrupt as on of the following
type, depending on the type of device using the interrupt.
Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific
interrupt (Such as IRQ4 for serial port 1)
PCI/ISA PnP Devices compliant with the Plug and Play standard, whether designed for PCI or
ISA bus architecture.
The Choice: PCI Device / Reserved.
PCI/VGA Palette Snoop
Leave this field at Disabled.