Contec SPI-8450-LLVA - Manual (Page 50)

CHAPTER 6 - RAID Controller
SPI-8450-LLVA
43
This is the first option screen when entering the FastBuild
TM
Setup.
FastBuild (tm) Utility 1.xx (c) 1996-2001 Promise Technology, Inc.
[ Main Menu ]
Auto Setup……………………………………………….. [ 1 ]
View Drive Assignments …………………………………[ 2 ]
View Array………………………………………………. [ 3 ]
Delete Array………………………………………………[ 4 ]
Rebuild Array……………………………………………..[ 5 ]
Controller Configuration………………………………….[ 6 ]
[ Keys Available ]
Press 1..6 to Select Option [ESC] Exit
1. To create a new array automatically, follow the steps under “Creating Arrays
Automatically”. We recommends this option for most users.
2. To view drives assigned to arrays, see “Viewing Drive Assignments”.
3. To delete an array (but not delete the data contained on the array), select “Deleting
An Array”. To rebuild a mirrored array, see “Rebuilding an Array”.
4. To view controller settings, see “Viewing Controller Configuration”.
NOTE: After configuring an array using FastBuild, you should FDISK and format the arrayed
drive(s) if you are using new, blank drives. Depending on the type of array you are
using.