Contec SPI-8450-LLVA - Manual (Page 87)

CHAPTER 8 - BIOS Setup
80
SPI-8450-LLVA
Main Menu Selections
This table shows the selections that you can make on the Main Menu
Item Options Description
Date Month DD YYYY
Set the system date. Note that the
‘Day’ automatically changes when
you set the date
Time HH : MM : SS Set the system time
IDE Primary Master
Options are in its sub
menu(described in Table 64) Press <Enter> to enter the sub
menu of detailed options
IDE Primary Slave
Options are in its sub
menu(described in Table 64) Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub
menu(described in Table 64) Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub
menu(described in Table 64) Press <Enter> to enter the sub
menu of detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive
installed in your system
Video
EGA/VGA
CGA 40
CGA 80
MONO
Select the default video device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you
want the BIOS to stop the POST
process and notify you
Base Memory N/A
Displays the amount of
conventional memory detected
during boot up
Extended Memory N/A
Displays the amount of extended
memory detected during boot up
Total Memory N/A
Displays the total memory available
in the system