Contec SPI-8450-LLVA - Manual (Page 8)

CHAPTER 1 – Introduction
SPI-8450-LLVA
1
Chapter 1 Introduction
1.1 Specification
y
Processor Socket: Socket 478
y
Processor: Intel(R) Pentium(R) 4 Processor 1.7GHz - 2.4GHz ,
Intel(R) Celeron(R) Processor 1.7GHz to 2.0GHz.
(Package Type: 478pin PPGA FC-PGA2, CPU Core: Northwood Core
only)
y
Bus Clock Rate(FSB): 400/533 MHz
y
Chipset: Intel 845GV Chipset includes GMCH (Graphics and Memory Controller
Hub), ICH4 (I/O Controller Hub) and FWH (Firm Ware Hub)
y
Memory Sockets: Two DIMM 184-pin socket for DDR200/266 SDRAM for up to
2GB. (No ECC support)
y
BIOS: Award BIOS, PnP support
y
Multi I/O: Winbond W83627HF chipset (LPC revision 1.0)
y
PCI to ISA Bridge: Winbond W83628F + W83629D
y
Parallel port: One high-speed parallel port, SPP/EPP/ECP mode
y
Series Port: Two 16550 UART ports, COM2 is RS-232C/422/485 configurable.
Baud rate: 19200 to 50bps (programmable)
y
Enhanced IDE: Two EIDE port, up to 4 IDE devices, support Ultra DMA
33/66/100
y
FDD Interface: Two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB)
y
USB Interface: Three box-header 5x2 connectors that support 6 USB2.0 compliant
ports
y
Watchdog Timer: Software programmable 255 levels (1-255Sec.). Reset
occurrence at the time of time up.
y
Hardware Monitor: Winbond W83627HF
y
IrDA: One 1x5 Pin-header
y
Keyboard / Mouse connector: One PS/2 keyboard/Mouse connector and one 6-
pins box-header for external keyboard/Mouse
y
IDE RAID: Support RAID 0 or 1, Two box-header 20x2 connectors (PDC2026R
controller chip) *1