Contec SPI-8450-LLVA - Manual (Page 53)

CHAPTER 6 - RAID Controller
46
SPI-8450-LLVA
6.2.5 View Array
The Define Array <3> option in the Main Menu displays the define array.
FastBuild (tm) Utility 1.xx (c) 1996-2001 Promise Technology, Inc.
[Define Array Menu]
Array No RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe 2 16126 Functional
Array 2 —— —— —— ——
Array 3 —— —— —— ——
Array 4 —— —— —— ——
[ Keys Available ]
Note: * — Bootable Array
[
↑] Up [↓] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive
6.2.6 Deleting an array
The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not
the same as deleting data from the drives themselves. If you delete an array by accident (and
before it has been used again), the array can normally be recovered by defining the array
identically as the deleted array.
WARNING: Deleting an existing disk array could result in its data loss. Make sure to record all array
information including the array type, the disk members, and stripe block size in case you wish
to undo a deletion.
FastBuild (tm) Utility 1.xx (c) 1996-2001 Promise Technology, Inc.
[ Delete Array Menu ]
Array No RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe 2 16126 Functional
Array 2 —— —— —— ——
Array 3 —— —— —— ——
Array 4 —— —— —— ——
[ Keys Available ]
[
↑] Up [↓] Down [ESC] Exit [Del] Delete