Kenton Control Freak all versions - Manual (Page 18)

F key operations
F key On name
This allows you to enter a name of up to 16 characters for each F key On.
F key On names are edited in the same way as slider names.
Press [STORE] then [EXIT] or use [SHIFT]/[STORE] to jump to
F key On data
Pressing the [––>] button will take you into the F key On edit pages:
This allows you to select the F key to edit by turning the Data Wheel.
Pressing the [––>] button will move to the next screen:
This is the minimum value setting for the F key. The Data Wheel can be used
to change the value if required.
Pressing the [––>] button will move to the next screen:
This is the maximum value setting for the F key. The Data Wheel can be used
to change the value if required.
Pressing the [––>] button will move to the next screen:
Use the Data Wheel to select the F key mode you require:
Sends the FK ON DATA message only when the F key is pressed.
Sends the FK ON DATA message when the F key is pressed and the FK OFF
DATA message when the F key is released.
Sends the FK ON DATA message and FK OFF DATA message on alternate F key
presses.
Pressing the [––>] button will move to the next screen:
The end of data setting can be changed with the Data Wheel to any of the
commands listed on page 21. There is space for up to 45 command or data
bytes to be entered here.
F key off name
This is edited in exactly the same way as F key On name.
F key Off data
Pressing the [––>] button will take you into the F key Off edit pages, which are
edited in exactly the same way as the F key On edit pages.
EDIT MENU 10
EDIT MENU 9
EDIT MENU 8
EDIT MENU 7
EDIT MENUS CONTROL FREAK
14
EDIT`FK``ON`NAME
Push`>`to`Select
Func`Key`to`Edit
Functn`Key`#```1
EDIT`FK``ON`DATA
Push`>`to`Select
``Header``Data``
`Button`ON`only`
````COMMAND`````
``End`of`DATA```
EDIT`FK`OFF`NAME
Push`>`to`Select
EDIT`FK`OFF`DATA
Push`>`to`Select
``Header``Data``
Minimum`Levl```0
``Header``Data``
Maximum`Levl`127
`Button`On`+ Off
`Button`Toggle``