Kenton Control Freak all versions - Manual (Page 48)

CAKEWALK PRO AUDIO USERS CONTROL FREAK
44
Cakewalk Pro Audio users Cakewalk users can control the mixing desk from the Freak.
Just follow the simple procedure that follows:
Open up the mixing desk inside
cakewalk and right click on slider 1;
this will bring up a sub-menu.
Click on remote control.This opens
up the remote control toolbox where
you can set up your controller.
For now select controller and set it to
number 7, this is volume control. Set
the MIDI channel to channel 1.
Press OK.
This has set up your slider.The slider
in cakewalk will now respond to
slider 1 on the Control Freak
(program 0 volumes ch 1-16) for
additional channels repeat procedure
as above and increase the MIDI
channel as you go: MIDI ch 2,3,4, etc.
For people using Yamaha’s DSP factory, the same procedure as above applies
for setting up volumes on the audio mixing desk.