Kenton Control Freak all versions - Manual (Page 27)

Editing examples – a step by step guide
In all the following examples the naming of the slider/button has been omitted as it is common to
all examples and is described fully on page 12.
Further editing examples will be made available on our website.
Example of making a slider control filter cutoff on the Global MIDI channel
In this case we are assuming that filter cutoff can be controlled with controller #74.This is by no
means always the case, but the method holds good for any other controller message such as MIDI
volume or pan etc. just by selecting a different controller number when prompted.
Press the [––>] key from home position to start edit and display the edit menu options.
Turn the Data Wheel to the right (clockwise) to display: EDIT`SLIDER`DATA
Press the [––>] key and use the Data Wheel to select the Slider to Edit
Press the [––>] key – leave Minimum Levl at 0
Press the [––>] key – leave Maximum Levl at 127
Press the [––>] key – the screen will display: ````COMMAND
``End`of`DATA
Turn the Data Wheel one click to the right to display: ```Controller
Press the [––>] key – the screen will display: Controller`Numbr
0``Bank`Select
Turn the Data Wheel to the right (clockwise) to display: 74`Sound`Cntrl`5
You can speed up the process by holding the [SHIFT] key down whilst
you turn the Data Wheel
Press the [––>] key – the screen will display: Controller`Value
Data`Val`00h```0
Turn the Data Wheel one click to the left to display: Data`from`Slider
Press the [––>] key – the screen will display: ````COMMAND
``End`of`DATA
Press the [STORE] key to save your data UPDATING`MEMORY
Press the [EXIT] key to go back to PLAY MODE
CONTROL FREAK EDITING EXAMPLES
23