Kenton Control Freak all versions - Manual (Page 58)

SPECIFICATIONS CONTROL FREAK
54
Specifications Freak STUDIO EDITION Freak ORIGINAL
User interface Controls: 16 x 60mm sliders 8 x 60mm sliders
16 x data push buttons 8 x data push buttons
8 x editing push buttons 8 x editing push buttons
Data entry wheel Data entry wheel
Power switch Power switch
Displays: LCD 2x16 back-lit LCD 2x16 back-lit
4 LED indicators 4 LED indicators
Connections Inputs: Power socket d.c. Power socket d.c.
2.1mm centre positive 2.1mm centre positive
MIDI In, 5 pin DIN type MIDI In, 5 pin DIN type
Ext1, 1/4” stereo jack socket Ext1, 1/4” Stereo jack socket
Ext2, 1/4” stereo jack socket Ext2, 1/4” Stereo jack socket
Outputs: MIDI Out,Thru 5 pin DIN type MIDI Out,Thru 5 pin DIN type
Accessories Operating manual Operating manual
Mains power adaptor (UK Only) Mains power adaptor (UK Only)
Physical data Dimensions: 432mm x 163mm x 58mm 269mm x 163mm x 58mm
Weight: 3Kg 2.5Kg
Power Supply 9V dc. @ 250mA
The Control Freak must be powered from a suitable power adaptor.
This should be 9 volts DC regulated or unregulated at 250mA or greater, terminated with a
2.1mm DC jack connected centre to positive.
UK models are supplied with a mains adaptor, but overseas customers must source locally.
Warranty The Control Freak comes with a 12 month back to base warranty (from purchase date).
Customer must arrange and pay for carriage to and from Kenton Electronics.
Support Control Freak profile updates for a wide range of devices are available from our website:
www.kenton.co.uk.
Comments Email your comments and ideas to: [email protected]