Kenton Control Freak all versions - Manual (Page 21)

Global operations
Global name
This allows you to enter a startup name.This name will be seen on power up,
and is edited in the same way as slider names.
Press [STORE] then [EXIT] or use [SHIFT]/[STORE] to jump to
Global data
Pressing the [––>] button will take you into the Global edit pages:
This allows you to set a default for the Global MIDI channel, which will be
remembered on power off/on. *1
Pressing the [––>] button will move to the next screen:
This allows you to set a default tempo which will be remembered on power
off/on. *1
Pressing the [––>] button will move to the next screen:
This allows you to set a SysEx device number for the Freak itself,
and also to set the Control Freak STUDIO EDITION to accept Control Freak
ORIGINAL profiles.You then use SysEx RX prog map to choose destination
programs for incoming profiles.
Range: 1-16 and “Dev =8 ch Freak”.You can usually leave this at 1 unless you
want to load 8 channel Freak data, in which case turn the Data Wheel one
click anticlockwise to show ‘Dev=8 ch Freak’.
Then press [STORE] to activate.
Pressing the [––>] button will move to the next screen:
Even numbered 8-channel profiles will go into the left sliders (1-8).
Odd numbered profiles will go into the right sliders (9-16).
This screen shows the first byte of an 8 byte Global SysEx header.You can enter
a string of up to 8 bytes here, which can be used in any SysEx string within any
program by selecting Global Sysex Header from the data variables list.
When you are in PLAY MODE and the data is being sent, the bytes are read
starting with byte #1 and will stop either when all 8 bytes have been sent or
when an End of DATA is encountered.
Press [STORE] to save any edits
then [EXIT] to return to PLAY MODE.
*1 The MIDI channel and Int clock tempo settings can be altered in real-time by accessing the
Real-time edit menu [<––]. Any changes made will be temporary and on power off/on will
default to the settings made in Global data as described above.
EDIT MENU 14
EDIT MENU 13
CONTROL FREAK EDIT MENUS
17
EDIT`GLOBAL`NAME
Push`>`to`Select
EDIT`GLOBAL`DATA
Push`>`to`Select
`````Global`````
MIDI`Channel```1
`````Global`````
Int`Clock````120
`````Global`````
Device`Number``x
Sysex``Byte`#``1
Data`Val`00h```0
UPDATING``MEMORY
....````````````