Compaq 230934-002 - Manual (Page 113)

Command Line Interface
C-6 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Syntax
Beacon On = Set Switch Beacon ON
Beacon Off = Set Switch Beacon OFF
Examples:
Figure C-4: Beacon On command
Config
This command displays and modifies the switch configuration backup and
configuration restore settings. It also activates the backup and restore function.
Configuration backup writes the switch’s configuration files to files specified by
“file” on the TFTP server specified by the IP address. Configuration restore
reconfigures the switch based on the files specified by “file “ from the TFTP server
specified by the IP address.
NOTE: When using the “backup” feature, some TFTP servers may not overwrite existing files.
These TFTP servers will create a new file with modified filenames, resulting in “restore” not
retrieving the expected file.
Syntax:
Config: Display config backup/restore
settings
Config File = <Filename> Modify config backup/restore
filename prefix
Config IP = <0.0.0.0> Modify TFTP server IP address
Config Backup Start configuration backup
Config Restore Start configuration restore