Compaq 230934-002 - Manual (Page 53)

MSA Fabric Switch 6 Management Utility
3-18 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: d-ch3 MSA Fabric Switch 6 Management Utility.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:52 AM
Table 3-4: Port Summary Window
Parameters Description
Port Identifies the port described in the row by its port number.
Status Displays one of the following:
Failed Diagnostics = could not initialize the port; the port has
failed.
Loopback mode = loopback cable is attached.
Offline = port was taken offline by management.
No media installed = no SFP installed.
Link down = SFP is installed but with no link established.
Link up = SFP is installed and a link to the device is
established.
Link active = SFP is installed, a link to the device is
established, and traffic is flowing.
Isolated = it is understood that the other port is an E-port but
complete initialization cannot be established.
Media Type Identifies the media type plugged into the port or that no media
adapter is attached
Port Type Displays the worldwide name for the port identified.