Compaq 230934-002 - Manual (Page 149)

Command Line Interface
C-42 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
The steps of stage one include:
• Viewing and clearing the pending table
• Creating the zone set
• Adding zones to the zone set
• Adding zone members to the zones
• Changing the names of the zone members (optional)
• Enabling the pending table zone set
Viewing and Clearing the Pending Table
Start by checking what has already been created:
1. View the pending table.
cmd> zone pending
Inactive zoneset [set1] contains 1 zone (s)
zone [ntgroup1] contains 0 member(s)
Inactive Zoneset [set2] contains 1 zone(s)
zone [solaris1] contains 0 members)
Inactive zoneset [set3] contains 1 zone(s)
zone [ntgroup2] contains 0 member(s)
NOTE: You can also use abbreviated forms of CLI commands. For example, instead of using
“
cmd> zone pending ,” you can use “ cmd> zn pn .” For a list of the CLI abbreviations,
type “ help .”
2. Clear the existing pending table.
cmd> zone clear
Cleared pending zone configuration.
3. Display the pending table to verify that it was cleared.
cmd> zone pending
Zone table is empty.