Monitoring from the device view, Monitoring from the device view -48 – Compaq 230934-002 User Manual

Page 83

Advertising
background image

MSA Fabric Switch 6 Management Utility

3-48

Modular SAN Array Fabric Switch 6 User Guide

COMPAQ CONFIDENTIAL

Writer: Kim L. Miller File Name: d-ch3 MSA Fabric Switch 6 Management Utility.doc

Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:52 AM

Monitoring from the Device View

Selecting the Device View button brings up Device View display. This display
allows you to monitor devices connected to the switch, as shown in the following
figure.

Figure 3-32: Device view

Depending on the icon selected in the tree, the Device View provides the following
information about the switch, the ports, or the devices connected to the switch.
Selecting members from the tree acts like a list filter. Selecting the switch in the tree
will list information about all the devices connected to the switch. Selecting a port in
the tree will list information about the selected port only. Selecting a device in the
tree will list information about the selected device only.

Port — The port number on the switch.
Node Type — The type of device connected to the port. For example, Storage

Device, or Raid Array. In cases where it is not possible to determine the device
type, it will be listed as “unknown.”

Remote Port Type — The type of port on the attached device.

Advertising
This manual is related to the following products: