Compaq 230934-002 - Manual (Page 35)

Initial Configuration of the Switch
2-18 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
Advanced Switch Configuration
After the initial configuration of the switch is completed, additional switch
configuration tasks become available.
As illustrated in Figure 2-12, links to the Switch Configuration Utility are displayed
for each switch. The Switch Configuration Utility is part of the MSA Fabric Switch 6
Management Utility that resides on the switch itself.
Parameters more advanced than those offered by ACU-XE are available in the
Management Utility.
Figure 2-12: Advanced switch configuration options
NOTE: Before using the Web-based Switch Configuration Utility, verify that the networking
cables have been connected between the management computer running ACU-XE and the
LAN management ports on the switch(es), usually through a Hub. Compaq recommends using
the PING command to ensure connectivity before selecting the Link.