Compaq 230934-002 - Manual (Page 140)

Command Line Interface
Modular SAN Array Fabric Switch 6 User Guide C-33
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Traps — Displays trap entry settings.
Traps Add <ip_address,port_number> — This command is used to add new
trap recipients. Up to eight trap recipients are supported. The command variables are
defined as follows:
Variables Description
ip_address Sets the IP address of the SNMP trap recipient that you want
to add.
port_number Sets the port number of the SNMP trap recipient that you
want to add. The default is 162.
Traps Delete <ip_address,port_number> — This command is used to delete
trap recipients from the recipients list. The command variables are defined as fol-
lows:
Variables Description
ip_address The IP address for the trap recipient that you want to remove
from the recipients list.
port_number The port number for the trap recipient that you want to
remove from the recipients list.
Traps Filter <ip_address,port_number> = <trap_type> — This
command is used to set the type of traps that you want forwarded to a particular
SNMP trap recipient. The command variables are defined as follows: