Compaq 230934-002 - Manual (Page 75)

MSA Fabric Switch 6 Management Utility
3-40 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: d-ch3 MSA Fabric Switch 6 Management Utility.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:52 AM
The following table lists the parameters of this panel.
Table 3-12: Network tab
Parameter Description
IP Address Displays the IP address assigned to the MSA Fabric
Switch 6.
Subnet Mask Displays the subnet mask assigned to the MSA Fabric
Switch 6.
Default Gateway Displays the default gateway assigned to the MSA
Fabric Switch 6.
MAC Address Displays the MAC address of the MSA Fabric Switch 6.
SNMP Trap Management Stations— This panel, as shown above in Figure 3-27,
allows you to add and remove stations that have SNMP traps forwarded to them.
• To add a station, type its IP address and Port Number in the top text boxes in this
panel and click the Add button.
• To remove a station from receiving traps from this Fabric Switch 6, highlight its
IP address in the list box at the bottom of this panel and click the Remove button.
• To apply the changes, click the Apply button. To undo all the changes and reset
the display to the original settings, click the Reset button.
NOTE: The port number entered should be a valid port address. Most systems support a
range of 1-65534
.