Setup > image, Advanced configuration with the web-based utility, Mpeg4 settings – Cisco WVC80N User Manual

Page 16: Mjpeg settings

Advertising
background image

Chapter 3

Advanced Configuration with the Web-based Utility

15

Wireless-N Internet Home Monitoring Camera

and the fields that accompany them are described in
detail below.

D

isable

This option implements no security on your wireless
network. Data is not encrypted before transmission.

Wireless Security - Disable Security Mode

WEP

WEP is a basic encryption method, which is not as
secure as later methods such as WPA-Personal or WPA2
Personal. However, it is supported by all clients.

Wireless Security - WEP Security Mode

TX Key

Select the number of the key used on the

wireless network.

WEP Encryption

Select the appropriate option

for key length based on your network settings.

Passphrase

Type in the passphrase used to

generate WEP keys on your network and click
Generate.

Key 1 - Key 4

Key values can be entered manually

or generated from a passphrase.

Authentication

Select

the

appropriate

authentication type used on the wireless network.

WPA/WPA2 Personal

This method offers TKIP encryption with dynamic
encryption keys.

Wireless Security - WPA/WPA2 Personal Security Mode

Shared Key

Enter the shared key of 8 to 63

characters that will be used to access the wireless
network.

When you are finished editing the Camera’s wireless
security settings, click Apply to save your changes and
return to the Setup > Basic screen. Click Cancel at any
time to cancel any unsaved changes and return to the
Setup > Basic screen. To get additional information about
the screen’s features, click Help.

Setup > Image

The Setup > Image screen allows you to alter the Camera’s
video settings.

Setup > Image

MPEG4 Settings

Resolution

Set the resolution for viewing and recording

the Camera’s video: 640x480 (high resolution) 320x240
(medium resolution), or 160x120 (low resolution).

Video Quality Control

Select either Constant Bit Rate

or Fixed Quality for the video stream.

Constant Bit Rate

Select the bit rate you want for

viewing or recording the Camera’s video. The range
varies from 64 Kbps to 1.2 Mbps.

Fixed Quality

Select the level of quality you want for

viewing or recording the Camera’s video. The range
varies from Very Low to Very High.

Max Frame Rate

Select the maximum frame rate for the

camera. Reducing this lowers the amount of bandwidth
required by the camera. The range is from 1 to 30.

MJPEG Settings

Resolution

Set the resolution for viewing and recording

the Camera’s video: 640x480 (high resolution) 320x240
(medium resolution), or 160x120 (low resolution).

Fixed Quality

Select the level of quality you want for

viewing or recording the Camera’s video. The range varies
from Very Low to Very High.

Advertising