NORAC UC5-BC-ECHO-VT - Manual (Page 37)

33
10 Diagnostics Menu
Diagnostics Menu provides useful information of the UC5™ Spray Height Control System and
test functions. Navigate to the UC5™ Settings Menu (Section 8.1) and choose the Diagnostics
button as shown in Figure 23 to access Diagnostics Menu.
In this menu selected sprayer type, software versions, actual sensor height readings, hydraulic
settings, geometry settings, and the valve movement test functions can be accessed. Refer to
Section 5 for the description of the icons.
Figure 23: Diagnostics Button Figure 24: Diagnostics Menu
Sprayer Type
By selecting Sprayer Type button, the selected
sprayer Type (Make and Model) will be
displayed.
Versions
In this screen the firmware and hardware
versions of UC5™ Controller (CM) and other
UC5™ modules such as height sensors (HS),
roll sensors (AS), Valve module (VM), or Input
module (IM). Non-NORAC modules may not
show the correct versions.
To check them select a desired module name
and its serial number from the list.
Sensors
The Sensors screen displays raw height sensor
readings of connected sensors. The example on
the right shows a five-sensor system.