NORAC UC5-BC-ECHO-VT - Manual (Page 6)

2
2 Safety Precautions
The UC5™ Spray Height Control system will greatly improve your spraying height accuracy
and protect the boom against damage in a wide variety of field conditions. However, under
some circumstances performance may be limited. The operator of the sprayer must remain
alert at all times and override the automatic control when necessary.
Under no circumstances should any service work be performed on the machinery while the
UC5™ Spray Height Control system is in Automatic Mode.
Always ensure that the UC5™ Spray Height Control system is powered down or in
Manual Mode:
 Before leaving the operator’s seat.
 While the machine is not moving.
 When transporting the machine.
Before working on any part of the booms:
 Set the UC5™ system to Manual Mode.
 Turn the sprayer engine off.
Do not operate this system before:
 Reading and understanding the operator’s manual.
 Thoroughly understanding the machine operation.