Sony XR-C7500RX - Manual (Page 30)

30
Changing the sound and
display settings
The following items can be set:
SET
•Clock (page 9).
•CT (Clock Time) (page 18).
•Beep – to turn the beep sound on or off.
•RM (Rotary Commander) – to change the
operative direction of the rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•Multi language (language selection) – to
change the display language to English,
Czech, Polish, or Turkish.
DIS
•D.Info (Dual Information)*
1 – to display the
clock and the play mode simultaneously (on),
or to display the information alternately (off).
•SA (Spectrum Analyzer) – to change the
display pattern of the equalizer display.
•Amber/Green* 2 – to change the illumination
colour to amber or green.
•Dimmer – to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the interior lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the init’s installed
position.
•M.Dspl (Motion Display) – to turn the
motion display on or off.
•A.Scrl (Auto Scroll)* 1 (page 32).
SND
•EQ Tune (Equalizer tuning) – to adjust the
frequency and volume level of equalizer
curve.
Attenuating the sound
Press (ATT) on the rotary commander or
card remote commander.
“ATT on” flashes momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).