Control panel overview – Shellab BACTRON600 User Manual
Page 19
19 |
P a g e
CONTROL PANEL OVERVIEW
Figure3: Main Control Panel
Main Control Panel BACTRON300
The main control panel on the BACTRON300 controls the heater and the Over Temperature Limit
System of the workspace chamber incubator. Controls for cycling the pass box atmosphere,
along with the power switch for the BACTRON, and the workstation gas injection light are also
located on this panel.
Main Control Panel BACTRON600
The main control panel on the BACTRON600 controls the heater and the Over Temperature Limit
System of the side storage incubator. Controls for the purging the pass box atmosphere, along
with the power switch for the BACTRON, and the workstation gas injection light are also located on
this panel.
Main Control Panel BACTRON900
The main control panel on the BACTRON900 controls the heater and the Over Temperature Limit
System of the side storage incubator. The controls for the workspace chamber incubator are
located on the
(see page 23). The controls for the pass box, along with
the power switch for the BACTRON, and the workstation gas injection light are also located on the
main panel.