Shellab BACTRON600 - Manual (Page 5)

5 | P a g e
INTRODUCTION
Thank you for purchasing a Shel Lab BACTRON Anaerobic Chamber Workstation. We know that in
today’s competitive market place, customers have many choices when it comes to constant
temperature equipment. We appreciate you choosing ours. Our continued reputation as a leading
laboratory product manufacturer rests with your satisfaction. Sheldon Manufacturing, Inc. stands
behind our products, and we will be there if you need us.
BACTRON workstations are intended for professional, industrial, and educational applications as
anaerobic workstations suitable for the cultivation of clinical bacteria. These units are not intended
for use at hazardous or household locations. Only use this equipment for its intended spectrum of
applications; any alterations or modifications void the warranty.
Before using the BACTRON read this entire manual carefully to understand how to install, operate,
and maintain the workstation in a safe manner. Keep this manual available for use by all
workstation operators. Ensure that all operators are given appropriate training prior to using the
BACTRON.
G
ENERAL
S
AFETY
C
ONSIDERATIONS
Note: Failure to follow the guidelines and instructions in this manual may create a protection
impairment by disabling or interfering with the unit’s safety features . This can result in injury
or death.
Your BACTRON and its recommended accessories are designed and tested to meet strict safety
requirements. The workstation is built to connect to a wall power source using the specific power
cord type shipped with the unit.
For continued safe operation of your BACTRON, always follow basic safety precautions including:
 Follow all local or regional ordinances in your area regarding the use of this unit. If you
have any questions about local regulations, please contact the appropriate agency.
 Use only approved accessories. Do not modify system components. Any alterations or
modifications to your BACTRON can be dangerous and void your warranty.
 Always plug the BACTRON power cord into an earth grounded electrical outlet that
conforms to national and local electrical codes. If the workstation is not grounded properly,
parts such as knobs and controls can conduct electricity and cause serious injury.
 Avoid damaging the power cord. Do not bend it excessively, step on it, or place heavy
objects on it. A damaged cord can be a shock or fire hazard. Never use a power cord if it is
damaged.
 Do not position the workstation in such a manner as to make it difficult to unplug the unit in
the event of an emergency.
 Ensure that the vacuum line from the vacuum pump to the workstation is not kinked, and
that the pump is placed in a location with adequate ventilation to avoid overheating.
 Do not attempt to move the workstation while in operation.