Basic operations of dab, 22 basic operations of dab – Sony MDX-M690 RU User Manual

Page 22

Advertising
background image

22

Basic operations of DAB

Searching for the ensemble and
service

— Automatic Tuning

1

Press

(SOURCE)

repeatedly to select

the radio.

2

Press

(MODE)

repeatedly to select

“DAB.”

3

Press and hold either side of

(SEEK)

until “Seek +” or “Seek –” appears.

The unit will stop seeking when an ensemble
is located. The unit will then automatically
select the first service and display its name,
and the display indicator will change from
“Seek +”/“Seek –” to the service name.

4

Press either side of

(SEEK)

to select

the desired service.

Selecting the ensemble

— Manual Tuning

If you know the channel number of ensemble,
follow the procedure below to tune in.

1

Press

(SOURCE)

repeatedly to select

the radio.

2

Press

(MODE)

repeatedly to select

“DAB.”

3

Press

M

or

m

until “Ch. XXX” appears.

4

Press

M

or

m

repeatedly until the

desired channel number appears.

Receiving the preset services

Following procedure is available after presetting
the service. For details on presetting the services,
refer to “Presetting DAB services automatically,”
(page 23) and “Presetting DAB services
manually” (page 23).

1

Press

(SOURCE)

repeatedly to select

the radio.

2

Press

(MODE)

repeatedly to select

“DAB.”

3

Press

M

or

m

repeatedly to select the

preset service.

Tip
There is another way to receive the preset service
(preset on numbers 1 to 6).
Press the number button (

(1)

to

(6)

) on which the

desired service is stored.

Refer to the level indication to check the
receiving condition of the DAB programme.
The level indication increases as the
strength of the receiving signal increases.

” will flash in the display if the reception is

poor.

Note

To display the level indication, select the spectrum
analyzer pattern A-1 or A-2 (page 33
).

level 1

level 2

level 3

level 4

level 0

Advertising
This manual is related to the following products: