Vexilar Flasher Family 2013 - Manual (Page 20)

20
Night Mode
( FL-20 & FLX-28 Only )
Night Mode reduces the
flasher’s display brightness
to make night time viewing
more comfortable to your
eyes. The display intensity is
reduced by about 50%.
FL-20 To activate Night
Mode, switch the Mode
control to either the Full
View, AZ6, or AZ12
position to the left. FLX-28 To activate Night
Mode or return the display
to full brightness, press and
hold on the top Gain control
knob for three seconds.
THE RIGHT HALF represents the entire
water column from the water surface to the
bottom. THE LEFT HALF represents the zoom view
from the bottom up to six feet. Read the
distance from the bottom up using the
green depth markers.
Bottom
Fish
The zoom scale reads in the
opposite direction as the full view
scale. The bottom will always be at the
7 o’clock position. Objects will appear above
this point. You can only see objects as far off the
bottom as the zoom setting permits, which is 6 feet.
Objects above this level will only appear on the right side,
which shows the entire water column.
FLX-28 - Auto Zoom