Vexilar Flasher Family 2013 - Manual (Page 9)

9
Setting the Range
FL-18
The FL-18 has 5 depth ranges. Zero to 20’, 40’, 60’, 80’, and 200’. To interpret depth,
you multiply the displayed reading by the range multiplier.
In normal mode, read the outer white scale and multiply by the
range setting. Here, the range is set to “x1”. Bottom is at 15
feet, a fish is at 12 feet, and there is a weak signal at 10 feet.
If the range control was set to “x2”, the bottom would be
interpreted as 30 feet, the fish at 24 feet, and the green mark
at 20 feet.
Normal mode selected
Reading the depth is the same in LP (Low Power) mode. Reading the depth in
AZ (Auto Zoom) or BL (Bottom Lock) mode is discussed on page 17